Saturday 24 October 2015

Pallet wood clock





So I started this wooden clock weeks ago after seeing so many nice ones on Pinterest. I basically wanted an oversized wooden clock that I could make from pallet wood.
If I had realised beforehand just how tedious and annoying it was trying to get the numbers and the angles of the numbers right I probably would have never started the project but hey ho it's finished now and I'm quite happy with the finished product.

I'll give you a run down on how I did it and I'll let you know how I would do it differently if I did another one.

First off I gathered several planks of pallet wood and laid them good side down - with pallet wood the "good" side is basically the better of either side, they're never going to be perfect.
Once I had them laid down I used large clamps to really squeeze them together ..... then I realised this was pointless as I couldn't attach the pieces that would hold them all together while the clamps were in place so even at this early stage I was making silly mistakes.
Once I had removed the clamps I attached 4 pieces across the back and screwed them down while trying to pull the front wood together as much as possible.
With that done and now measuring approx 40" x 40" I found the centre point and used that point to draw the circle I would then cut out. TBH there has got to be easier ways to draw a circle but I used a nail in the centre, attached a pencil to string, attached the string to the nail and did the circle that way BUT it kept coming out wrong because no matter how hard I tried to keep the pencil in the right position I found that even a teeny tint movement took the circle off circle - so frustrating!
I managed it eventually and then I just cut the circle out with my jig saw - it was at this point when I realised I should have used less screws to screw the back supports on and I should have made sure they were out of the path of the jigsaw. I broke a couple of blades before admitting defeat and actually unscrewing certain nails - yes I am that lazy that I would waste blades rather than unscrew something.


As you can see the circle wasn't perfect but it didn't take long to sand that bulge out.



Next I needed to create a half inch or so band all the way round the clock. I decided to try using the same nail method but with 2 strings attached to the pencil - I figured this would stop that movement I spoke of earlier. It didn't! After several attempts I was getting the same rubbish result and the band would be half inch thick in one place a quarter inch thick in the next, so I came up with what I think was a brilliant idea but forgot to photograph it.
To get the band regular all the way round I put my metal ruler at the top black mark and then I marked with a pencil half inch or so down from it. Then I moved an inch to the right and repeated - all the way round. Time consuming but I don't mind that when I know it will result in an even band! Once I had gone all the way round I just used a pencil to join all those dots up and the band was formed.
This next part was the part that got me swearing and cursing for days on end. For the life of me I could not figure out how to get the numbers in the correct places, not only speced evenly but looking correct with the opposite number. It was easy to get the line from 12 to 6 right and the 9 to 3 right but the rest of them just wouldn't come out even no matter how much I measured and divided.
Eventually I had another brain wave - I used my pull down saw to cut a piece of wood with a perfect 30 degree angle to it.
This piece of 30 degree wood was then used from the middle of the clock face to give me the correct angle for each number, so all I had to do was draw a line along that 30 degrees.


Once I had all the lines in place I could freehand the roman numerals - this was the next tedious part and next time I would definitely consider vinyl instead of a sharpie.


Once i had all the numbers on I used a sharpie to go over them and then also went ahead and coloured in the band that I created before.
Once that was done I gave it a coat of varnish and that's pretty much it.
But what about the clock mechanism you may ask. Well, I actually forgot about it! No seriously I forgot it needed a mechanism. Once I went online to buy one I found that I couldn't find one that would go through my thickness of wood even with an extender. I was advised that I could route out a few mils on the backside of the clock so that a mechanism would then fit in this gouged out area but I'm way too lazy for that. Instead I bought one of those mechanisms that you stick directly to a wall and then stick numbers on the wall too. Obviously I didn't need the numbers but the mechanism and hands were easy to fit to the clock.


It's not on the wall yet because the wood started to seperate as it dried out indoors. You can see that the 3rd plank down is showing a small gap at the bottom of it. If this is as bad as it gets then I'll hang it but if it gets worse I will have to adjust it from behind cos it will bug the hell out of me.

NEWDIYBUTTON
Sharing at
The Interior Frugalista
Skip The Housework

Sunday 11 October 2015

Antique wooden trunk

I now have a workshop full of half finished and not yet started projects - a symptom of trying to juggle too many things I'm afraid. The end result of having so many things to do is that nothing is getting finished and yet despite this fact I still went to auction and bought up every piece of furniture that went for £3 or £5. Ordinarily I would love the fact that no one wanted the furniture but my lack of ability to say No means I now have too much to do and unfortunately this comes at a time when not only is the garden renovation needing my time but I also need to get started on christmas decorations. So it seems I have to learn to prioritise - eek!

With this lack of time in mind I decided that the wooden trunk I bought at auction would have to get less of a makeover than I originally intended.
It was going to get a serious paint job and distressed but oh well I still like how it turned out.

It was in fairly good knick anyway so I was determined to win this piece and paid something like £55 for it. Normally I would have stopped at £30 as I really am a tight wad but I didn't know when another dome top wooden trunk would come along up here in the back of beyond so I left the bidding to Mr CH.
As you can see it was originally covered in canvas. The canvas was filthy though and I considered leaving it on for all of 10 seconds. The main reason to strip it off - other than the ghastly smell - was that I saw evidence of woodworm on the inside when I pulled off some paper.



The entire trunk had to be stripped inside and out, hours into this project I realised that there was going to be no skimping on it - this 'quick' makeover was going to be anything but.
The canvas had to be burned off as it had been glued on with something that just would not budge but yet seemed to turn to dust when heat was applied.
Once it was completely stripped inside and out it had to be treated for woodworm as there was alot of evidence of the little blighters. There's every chance they were gone but I couldn't risk it as the trunk was to go in the living room which has solid wood floors - suffice to say I literally drowned the thing in killer.
The outside was then dyed with Wickes Medium Oak wood dye and given a couple of coats of varnish.


 All of the metal work had to be brushed with a wire brush and toothbrush - more tedious work.
I then used a teeny tiny art brush and painted all the metal work with Hammerite Black hammered paint - this was actually the best part, I love this kind of work.

See all the woodworm holes.

Inside I gave it a coat of paint but being the tight gal I am it had to be a colour I already had. I was going to go for white because I'm totally unadventurous when it comes to these things but I found a large tub of Farrow & Ball paint that was crying to be used - why not!
Initially I was going to do several coats of solid colour but tbh I just wanted it done so I could gain some space so I did one coat and then distressed it and gave it a coat of varnish.


I love how it turned out, it wasn't as quick as I thought it would be but it looks great in the front room holding all our winter blankets.


Sharing atNEWDIYBUTTON
The Interior Frugalista